Omnia Health is part of the Informa Markets Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

Daily Dose

DHA drives forward patient care with pioneering 3D printing lab

Article-DHA drives forward patient care with pioneering 3D printing lab

DHA.jpg
The newly opened 3D Printing Lab provides medical professionals with patient specific anatomical models.

Medical Experts from Dubai Health Authority’s (DHA) Innovation Centre have collaborated with Sinterex, an additive manufacturing healthcare specialist firm, to bring 3D Printing to the point-of-care at DHA Hospitals-Rashid, Latifa, Dubai, and Hatta Hospital.

The newly opened 3D Printing Lab located at the DHA’s Innovation Centre provides medical professionals at DHA with patient-specific anatomical models allowing them to conduct detailed pre-operative analysis and to improve patient communication.

The workflow starts with patient data acquisition, typically from a CT or MRI scan. This patient data is then brought into medical image segmentation software, which allows the physician to isolate the specific anatomical region of interest. This digital model is then converted into a 3D printable file and produced using the state-of-the-art 3D printers in the lab.

Dr. Farida Al Khaja, CEO of Medical Support Services and Chair of Medical Innovation Council at DHA explained that this initiative in is line with the DHA’s vision of incorporating latest medical technology in the health sector with a primary aim to better patient care. Additionally, technology also helps improve efficiencies and reduce costs.

Al Khaja said this initiative, in particular, will help DHA medical professionals achieve greater surgical success, particularly for complex cases.

She added that the lab is an important milestone in the execution of the DHAs 3D Printing Strategy, which focusses on deploying the latest technologies to improve patient outcomes and support the healthcare ecosystem of Dubai to excel in difficult medical surgeries.

3D Printing to assist in complex surgeries

Sinterex has deployed its biomedical engineers to operate the 3D lab. Julian Callanan, Managing Director, explained that having the biomedical engineers on-site and working side-by-side with the medical professionals, helps boost communication and cooperation and it reduces the time taken to develop the final 3D model.

Mai Al Dossari, Director of the DHA’s Health Innovation Centre, said, “This is the first major project in the Innovation Centre since it was inaugurated. The 3D Lab has been involved in supporting DHA’s surgeons in successfully planning and achieving complex surgeries. The Cardiology team at Rashid Hospital used 3D models to pre-operatively plan and test the fitting of Trans Aortic Valve Implants. The Maxillofacial team have produced models of patients’ jaws and skulls taking these into surgery for visual reference and intra-operative monitoring. Whilst at Hatta Hospital, the Orthopedics department has been printing knees and shoulders to support planning for reconstruction surgeries.”

Not only is the initiative good for patients, but recent research also shows the commercial benefits of bringing 3D printing to the point-of-care.

A recent study published in September by Academic Radiology estimated that hospitals using anatomical models could save more than US$3,700 per surgery by reducing time spent in the Operating Theatre. The authors reached their conclusions by analyzing more than 30 different studies related to 3D models used in orthopaedic and maxillofacial surgery. Based on that review, they estimated that anatomical models could shorten surgery time by about 62 minutes on average. 

Dr. Mohammed Al Redha, Director of Project Management Office and Informatics and Smart Health at DHA says, “This is an important strategic step for the DHA. It is also a further example of how the DHA is integrating 3D Printing into its day-to-day workflows to secure better results for its patients.”

According to Gartner, a leading research and advisory company, in 2018, nearly 3 per cent of large hospitals and medical research institutions had 3D printing capabilities on site.

Al Redha says, “We are truly proud that we have been able to successfully integrate this technology in workflows. Having a 3D printing lab means that we can produce patient-specific 3D printing models especially needed for complicated surgeries. This initiative is in line with the vision of Dubai’s 3D printing strategy to become a global 3D printing technology hub by 2030.”

TAGS: 3D Printing
Hide comments
account-default-image

Comments

  • Allowed HTML tags: <em> <strong> <blockquote> <br> <p>

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.
Publish